• Mail Us

We are Manufacturer, Supplier, Exporter, Services Provider of Two Pack Epoxy Zinc Phosphate Grey Primers, Two Pack Epoxy Red Oxide Zinc Phosphate Primers, Two Pack Epoxy Red Oxide Zinc Phosphate Primer, Two Pack Epoxy Zinc Rich Grey Primers and our setup is situated in Pune, Maharashtra, India.

We provide these Quick drying primers and paints to various steel structure and grating manufacturing industries. These coating products are most suitable for protecting metals from corrosion. These products have excellent adhesion and hardness.

TWO PACK EPOXY ZINC PHOSPHATE GREY PRIMER

TWO PACK EPOXY RED OXIDE ZINC PHOSPHATE PRIMER

Product Description :   EPOXY Anticorrosive Primer
Recommended use : Steel Structures, traction batteries, Chemical plants , MS Tanks, Machine tools & Transformers
Features : • Excellent Adhesion Properties 
• High Performance Corrosion control
• Recoat ability with any type of Paint
Physical Properties :
Colour Shade Red oxide
Volume Solids 52 (± 3%)
D.F.T. 30 to 40 microns
Theoretical Coverage 9 to 10 sq. meter @ D.F.T. 25 μ
Flash point Base - 26° C; Hardner - 28°C
Sp. Gravity Base 1.50 (± 0.1 ) kg per Ltr.

Hardner 0.90 (± 0.05) kg / Ltr.

Surface Preparation : • Surface to be coated should be completely clean , dry and free from contamination.
• Remove oil & grease with suitable solvent or detergent
• Remove rust, mill scale and other loose material by wire mesh / abrasive blasting
Performance Properties :

Acid / Alkali Resistance-  for 10% solution – 24 hours
Salt Spray – passes 230 hours

   
Application :
Application Conditions Ambient temperature shall be above 10°C and relative   
humidity shall be below 85%. Adequate ventilation shall be  
provided in confined spaces
Mixing Stir each component with mechanical stirrer before mixing
Mixing ratio Paint : 3 parts, Hardner : 1 part , Thinner : 1 part (by volume)
Application method By air assisted spray gun
Pot Life Minimum 4 hours at 30°C
(Pot life may be reduced at higher temperature)
Drying Time Surface Dry – 20 to 25 minutes
Touch Dry – 1 to 2 hours
Over Coating Minimum- 8 hours maximum – 7 days
Shelf Life Base : 12 months; Hardner : 12 months from the date of mfg

TWO PACK EPOXY RED OXIDE ZINC PHOSPHATE PRIMER

Product Description :   EPOXY Anticorrosive Primer with modified hardner
Recommended use : Steel Structures, traction batteries, Chemical plants , MS Tanks, Machine tools & Transformers
Features : • Excellent Adhesion Properties 
• High Performance Corrosion control
• Recoat ability with any type of Paint
Physical Properties :
Colour Shade Red oxide
Volume Solids 52 (± 3%)
D.F.T. 30 to 40 microns
Theoretical Coverage 9 to 10 sq. meter @ D.F.T. 25 μ
Flash point Base - 26°C ; Hardner - 28°C
Sp. Gravity Base 1.50 (± 0.1 ) kg per Ltr.

Hardner 0.90 (± 0.05) kg / Ltr.

Surface Preparation : • Surface to be coated should be completely clean , dry and free from contamination.
• Remove oil & grease with suitable solvent or detergent
• Remove rust, mill scale and other loose material by wire mesh / abrasive blasting
Performance Properties :

Acid / Alkali Resistance-  for 10% solution – 24 hours
Salt Spray – passes 500 hours

Application :
Application Conditions Ambient temperature shall be above 10°C and relative   
humidity shall be below 85%. Adequate ventilation shall be  
provided in confined spaces
Mixing Stir each component with mechanical stirrer before mixing
Mixing ratio Paint : 3 parts, Hardner : 1 part, Thinner : 1 part (by volume)
Application method By air assisted spray gun
Pot Life Minimum 5 hours at 30°C
(Pot life may be reduced at higher temperature)
Drying Time Surface Dry – 10 to 15 minutes
Touch Dry – 2 to 3 hours
Over Coating Minimum- 8 hours maximum – 7 days
Shelf Life Base : 12 months; Hardner : 12 months from the date of mfg

TWO PACK EPOXY ZINC RICH GREY PRIMER

Product Description :   EPOXY Primer with cathodic protection from corrosion
Recommended use :

Steel Structures,  Chemical plants , Transformers & marine Industry

Features : • High Performance Corrosion control
• High Build Primer
• Excellent Adhesion property
Physical Properties :
Colour Shade Grey
Volume Solids 52 (± 3%)
D.F.T. 40 to 50 microns
Theoretical Coverage 5 to 6 sq. meter @ D.F.T. 40 to 50 μ
Flash point Base - 28°C
Sp. Gravity Base 1.80 (± 0.1 ) kg per Ltr.

Hardner 0.90 (± 0.05) kg / Ltr.

Surface Preparation : • Surface to be coated should be completely clean , dry and free from contamination.
• Remove oil & grease with suitable solvent or detergent
• Remove rust, mill scale and other loose material by wire mesh / abrasive blasting
Performance Properties :

Acid / Alkali Resistance-  for 20% solution – 24 hours
Salt Spray – passes 500 hours

Application :
Application Conditions Ambient temperature shall be above 10°C and relative   
humidity shall be below 85%. Adequate ventilation shall be  
provided in confined spaces
Mixing Stir each component with mechanical stirrer before mixing
Mixing ratio Paint : 3 parts, Hardner : 1 part , Thinner : 1 part (by volume)
Application method By air assisted spray gun
Pot Life Minimum 5 hours at 30°C
(Pot life may be reduced at higher temperature)
Drying Time Surface Dry – 15 to 20 minutes
Touch Dry – 1 to 2 hours
Over Coating Minimum- 8 hours maximum – 7 days
Shelf Life Base : 06 months; Hardner : 06 months from the date of mfg
Request A Quote