Go to Home Pagewant to know about our company? Clients Products Data Sheet Contact Us
Featured Product
Pioneer Coats
Applications
Pioneer Coats
Pioneer Coats
Directions to Use

Clean surface / object properly by thinner as pretreatment system. After cleaning do the phosphating.

Apply one coat H. B. Z/P P S Grey, kindly note that DFT of this coat should be more than 40 microns.

For curing this coat required 8 to 10 hrs. at R. T. or by forced dry (Oven baking) at 80 to 90 °c for 20 min.

Apply P. U. Paint & maintain DFT of this coat 30 – 40 micron

Curing time of this paint takes 8 to 10 hrs. It required force dry temp is 80 - 90 °c for 20 min.


TWO PACK POLYURETHANE FINISH PAINTS

 
Two pack Acrylic polyol based system cured with polyisocynate adduct. Specially designed to meet the requirements of Automobiles industry, Electric industries, electronic, mechanical & other industries
 Product Specifications
 
Composition   Two pack Acrylic polyol base cured with polyisocynate adduct.
Sp. Gravity   Solid 1.20 (± 0.05kg) per Ltr.
Non-Volatile Content   60% (± 5%)
Finishes of Grinding   7+
Supply Viscosity   80 (± 10 sec) at Room Temp
Application viscosity   20-22 Sec
Mixing Ratio   Paint : 8 parts, Hardener : 1 part , Thinner : 4 parts.
Pot life   6 hrs. min at 25 °c
Thinner   P.U. Thinner
Covering   100 ± 10Sq.fts
     
Dry film Properties    
     
Gloss   90 units at 60 °c
Dry film thickness   25 to 30 microns
Pencil hardness   2 H
Scratch hardness   Passes 2000 gms
Flexibility test   1/8” Passes
Impact test   60cm (500gms) passes
Adhesion ( Cross Cut)   100% (TG-5) for 1mm
Mar Resistance   after 7 days, no scratch marks, when nail run over it
Film appearance   Smooth & Glossy
     
DRY FILM RESITANCE PROPERTIES    
     
Resistance of Engine Oil   No deterioration of gloss, hardness of paint film (48hrs.)
Resistance of Gear Oilss   No deterioration of gloss, hardness of paint film (48hrs.)
Resistance to Petrol   No deterioration of gloss, colour, hardness of paint film (24hrs. at R.T.)
Resistance to Acid   No Change in colour & Gloss (0.1N) (H2SO4) (24hrs. R.T.)
Resistance to Alkali   No Change in colour & gloss (2% NaoH) (24hrs. R.T.)
Salt Spray   Passes (5% Nacl solution)
Moisture Resistance   No Blistering, loss of gloss, loss of adhesion when exposed To R.H. 95-98% at 42-48 °c for 240 hrs.
Accelerated weathering test four hrs UV range at 55-60 °c & 4hrs. condensation 45-50 °cfor 500hrs.   Free from decolouration, loss of gloss blister, cracks, chalking, rust formation & loss of adhesion . Gloss reduction 10% fromoriginal gloss accepted.
 
Directions to Use

Clean surface / object properly by thinner as pretreatment system. After cleaning do the phosphating.

Apply one coat H. B. Z/P P S Grey, kindly note that DFT of this coat should be more than 40 microns.

For curing this coat required 8 to 10 hrs. at R. T. or by forced dry (Oven baking) at 80 to 90 °c for 20 min.

Apply P. U. Paint & maintain DFT of this coat 30 – 40 micron

Curing time of this paint takes 8 to 10 hrs. It required force dry temp is 80 - 90 °c for 20 min.
Designed by : MID   Hosted by : GID   Promoted by : PBD