Go to Home Pagewant to know about our company? Products Data Sheet Contact Us
Featured Product
Pioneer Coats
Applications
Pioneer Coats
Pioneer Coats
Directions to Use

Clean surface / object properly by thinner as pretreatment system. After cleaning do the phosphating.

Apply one coat H. B. Z/P P S Grey, kindly note that DFT of this coat should be more than 40 microns.

For curing this coat required 8 to 10 hrs. at R. T. or by forced dry (Oven baking) at 80 to 90 °c for 20 min.

Apply P. U. Paint & maintain DFT of this coat 30 – 40 micron

Curing time of this paint takes 8 to 10 hrs. It required force dry temp is 80 - 90 °c for 20 min.


ONE PACK ZINC RICH GREY PRIMER
 

This primer contains high percentage of zinc dust as anticorrosive pigments, and this pigment gives cathode protection to metal from corrosion. Due to high Zinc dust content it gives around 50-60 micron dry film thickness in one coat. Other film properties such as adhesion, scratch hardness , salt spray resistance are excellent as compared to epoxy red oxide primer / zinc chrome yellow primer. The system is based on Epoxy Ester resin.
 Product Specifications
 
Viscosity  

90 +-15 seconds by Ford Cup No. 4 at R.T
Non volatile matter  

85+5 % by weight
Weight per Liter   1.75 + 0.05 Kgs / Liter
Drying Time   Surface Dry – 15 minutes, Tack free – 2 to 4 hrs., Recoating period – 10 to 12 hrs
Adhesion   Excellent, passes crosscut test
Scratch Hardness  

1.5 Kg. Load passes
Flexibility Test  

Passes

Gloss / Finish   Matt / Egg shell
Salt spray Resistance   Passes for 200 hrs
Acid –alkali resistance ( 20 % Solution )   Excellent
Pot life  

6 to 8 hours
Covering capacity   120sq.ft / lit at 25 micron , 80 ( ± 10 sq.ft )./lit at 60 micron
Mixing Ratio  

Primer 3 parts hardner – 1 part by volume, Epoxy Thinner – 1.5 – 2 parts

Zinc Dust   40 % by Weight.
Self Life   1 Year.
Topcoat Used   Epoxy Paint, Polyurethane Paints, Chlorinated Rubber Paint, Vinyl Paints
Flash Point   28 °c
Thinner  

Epoxy Thinner/ Stoving Thinner
Component   1
Temp Resist  

93 °c
     
 
 
  TWO PACK EPOXY ZINC RICH GREY PRIMER
 
This primer contains high percentage of zinc dust as anticorrosive pigments, and this pigment gives cathodic protection to metal from corrosion. Due to high Zinc dust content it gives around 50-60 micron dry film thickness in one coat. Other film properties such as adhesion, scratch hardness , salt spray resistance are excellent as compared to epoxy red oxide primer / zinc chrome yellow primer. The system is based on epoxy-polyamide resin.
 
 Product Specifications
 
Viscosity  

90 +-15 seconds by Ford Cup No. 4 at R.T
Non volatile matter  

85+5 % by weight
Weight per Liter   1.75 + 0.05 Kgs / Liter
Drying Time   Surface Dry – 15 minutes, Tack free – 2 to 4 hrs., Recoating period – 10 to 12 hrs
Adhesion   Excellent, passes crosscut test
Scratch Hardness  

1.5 Kg. Load passes
Flexibility Test  

Passes

Gloss / Finish   Matt / Egg shell
Salt spray Resistance   Passes for 200 hrs
Acid –alkali resistance ( 20 % Solution )   Excellent
Pot life  

6 to 8 hours
Covering capacity   120sq.ft / lit at 25 micron , 80 ( ± 10 sq.ft )./lit at 60 micron
Mixing Ratio  

Primer 3 parts hardner – 1 part by volume, Epoxy Thinner – 1.5 – 2 parts
Zinc Dust   40 % by Weight.
Self Life   1 Year.
Topcoat Used   Epoxy Paint, Polyurethane Paints, Chlorinated Rubber Paint, Vinyl Paints
Flash Point   28 °c
Thinner  

Epoxy Thinner
Component   2
Temp Resist  

93 °c
     
 
Designed by : MID   Hosted by : GID   Promoted by : PBD