Featured Product

Applications

Directions to Use

Clean surface / object properly by thinner as pretreatment system. After cleaning do the phosphating.

Apply one coat H. B. Z/P P S Grey, kindly note that DFT of this coat should be more than 40 microns.

For curing this coat required 8 to 10 hrs. at R. T. or by forced dry (Oven baking) at 80 to 90 °c for 20 min.

Apply P. U. Paint & maintain DFT of this coat 30 – 40 micron

Curing time of this paint takes 8 to 10 hrs. It required force dry temp is 80 - 90 °c for 20 min.

Two Pack Epoxy finishes ( Polyamine / Polyamide )

Product Specifications

Physical Properties (Liquid Paint) : -

Composition		Two pack Epoxy Enamel (Polyamine)
Specific Gravity		Base
Non volatile matter		60% (± 5)
Fineness of grinding		+7 (Hegman Guage)
Supply viscosity		1.20 (± .05), Hardner : 0.88 (± .05)
Mixing Ratio		Base – 2 Part , Hardner – 1 Part, Thinner – 1 Part
Application Viscosity		22 - 25 Sec by Cup at R.T.
Drying time		Surface Dry : 15 - 20 min., Tack free :2 hrs, Hard Dry. : 10 hrs.

DRY FILM PROPERTIES

Finish		Smooth & Gloosy
Color		As per Standard
Hardness		Pencil Hardness : ± 2 ltr Pencil Hardness : 2000gms
Glossy		80 units at 60 ° c
Flexibility		1/8” passes
Impact		500gms at 50cms
Solvent Resistance		Passes 100 Cycles for acetone rubbing
Acid Resistance		10% Nitric acid at R.T. for 24 hrs. 20% Sulfuric acid at R.T. for 16 hrs. 10% H.C.L. at R.T. for 48 hrs.
Alkali Resistance		Caustic soda at R.T. for 24 hrs. Loss of gloss up to 50% to original gloss accepted
DFT		25-30 micron per Coat
Salt Spray		240 hrs
Moisture Resistance		240 hrs.
Coverage		10sq.mts (± 5%) per coat per Ltr.